Free UK Site Assessment 10-Year Guarantee UK Support Heavy-duty recovery of oil, coolant and swarf from machining centres and lathes — separating liquids from solids for clean-down and fluid reuse.
Machining produces a mix of cutting fluid, oil and metal swarf that a standard dust vacuum can’t handle. These machines are built for it — drawing up the liquid-and-solid mix and separating the two, so swarf is collected for disposal and clean coolant can be returned to the machine rather than thrown away. The range spans the M70 and Clean Oil T up to the larger Oil Ram 1000.
Tell us your fluid type and volumes and we’ll match the separation and tank capacity to your shop.
Showing oil & swarf vacuums
The CLEAN AIR is a compact oil-mist collector for machine tools, driven by an electric fan and built around four progressive filtration stages with an M-class cellulose cartridge. It captures oily mist at source, drains the collected oil away and returns purified air to the shop floor.
An industrial vacuum that separates oil and metal chips from tanks, tables and machine tools — filtering and reusing cutting and lubricating oils while collecting the swarf. Driven by a side channel blower with flux inversion, available in 2.2 kW and 3 kW versions.
The M100 OIL is a Depureco industrial vacuum that separates oil and metal swarf from tanks, tables and machine tools, filters the fluid for reuse and discharges it by gravity. Three single-phase by-pass motors provide the suction, in a sturdy painted-steel body built for the workshop.
An industrial vacuum that separates oil and metal swarf from tanks, tables and machine tools, filtering cutting and lubricating oils for reuse. Driven by a 2.6 kW by-pass motor, with anti-foam filtration and a gravity drain hose, in sturdy painted steel.
The Depureco RAM OIL is a heavy-duty industrial vacuum built to empty machining-centre tanks — separating lubricating and cutting oils from swarf so the oil can be filtered and reused. Offered in three motor ratings with a choice of tank sizes.
The RAM OIL 200 MP is an industrial sump vacuum that extracts and separates oil and metal swarf from CNC machine tanks, filtering the reclaimed oil for reuse. An onboard pump discharges the filtered liquid while it vacuums, so collection and emptying happen together.
The RAM OIL 280 MP is an industrial vacuum for CNC machining-centre maintenance: it clears oil and swarf from machine tanks and filters the cutting and lubricating oils for reuse, drawing and discharging the filtered liquid at the same time. Sturdy painted steel, CE marked, with a 280-litre liquid capacity and 40-litre solids capacity.
No machines match all your filters.
Try widening or removing one — ATEX single-phase units, for example, are listed under ATEX vacuums.
They handle a wet mix of cutting fluid, oil and metal swarf, and separate the liquid from the solids — so swarf is collected and coolant can be recovered. A dry dust vacuum isn’t built for liquids or heavy metal chips.
Yes — the machines separate solids from the fluid so filtered coolant can be returned to the machine tool rather than discarded, cutting fluid costs and waste. The right setup depends on your fluid and contamination level.
The M70 and Clean Oil T suit single machines and smaller volumes; the Oil Ram 1000 handles larger tanks and higher throughput. Tell us your fluids and volumes and we’ll specify one.
Direct from the manufacturer UK-based technical team Send us a short description of the job — the material, the volume, the regulations that apply — and we'll come back with a recommended machine and a quote.
