The Depureco XFLOOR 3 H is an industrial vacuum built for the most demanding fine-dust work — construction, de-lamination, and floor or surface treatment, where the dust is not just a nuisance but a hazard to health. It is certified for type H dust to IEC 60335-2-69:2021 Annex AA, the standard that governs the safe capture of dust harmful to humans, and it is Italian-engineered by Depureco, which has manufactured industrial vacuums since 1972.
Filtration works in two progressive stages. A large star-shaped primary filter of class M, in polyester media with a 24,000 square centimetre surface area, holds back the bulk of the dust, and a secondary H14 absolute filter — included as standard — traps the finest particles before the air leaves the machine. Suction is delivered by by-pass motor power of 3.9 kW, giving a maximum airflow of 570 cubic metres per hour and 250 millibar of continuous vacuum. A tangential inlet spins the incoming air in a cyclonic action to drop heavier material out before it ever reaches the filter, and a manual shaker cleans the filter in seconds to keep suction consistent.
Where the XFLOOR 3 H earns its place is in what happens to the dust once it is captured. Its Endless Bag system collects everything into a continuous, sealable liner, so operators close and remove a full bag without ever coming into contact with the material — the difference between merely cleaning a site and controlling a health risk. Built and CE-marked for ordinary, non-classified areas, it is not ATEX zone-certified for potentially explosive atmospheres; where that is a requirement, choose a Depureco vacuum built and certified for hazardous-area duty. As a machine engineered to be serviced and cleaned rather than replaced, it is designed to keep its running costs down across a long working life.
