Mastervac 3 Phase 415V

vacuum suppliers

HEPA vacuum suppliers in the West Midlands


Contact Depureco for high quality vacuum cleaners.
Get in touch

Wide range of vacuum cleaners


The Mastervac 3 Phase 415 Volt Vacuums come in 2 categories
TS300.2.2KW - TS400.4KW -TS550.5.5KW -TS7505.5-7.5KW
Larger Vacs TS751.5.5KW -TS1000.7.5KW -TS1500.11.5KW - TS1800.12.5KW - TS3000.25KW

Suction unit


The suction is provided by a suction unit of the side channel blower type, with direct coupling between the fan and the motor shaft and no transmission system. It is thus completely maintenance free, fit for round-the-clock 24 hour duty, very silent and provides outstanding suction performances; a safety thermic switch cuts off the motor in case of overheating. The control board includes a switch (protection IP55), and a safety emergency stop button. A vacuum indicator enables constant checking of the suction performance, and to detect possible clogging of the filter.
Filter unit
The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with pockets in order to increase the filter surface (20.000 cm2), and has a high filtration efficiency (3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter.
Collection unit
The vacuumed material is placed inside a drop-down bin mounted on wheels (100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag. The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.
suction unit

Technically sound units


The suction is provided by a suction unit of the side channel blower type, with direct coupling between the fan and the motor shaft and no transmission system. It is thus completely maintenance free, fit for round-the-clock 24 hour duty, very silent and provides outstanding suction performances; a safety thermic switch cuts off the motor in case of overheating The control board includes a switch (protection IP65), and a safety emergency stop button. A vacuum indicator enables constant checking of the suction performance, and to detect possible clogging of the filter.
Filter unit
The filter is placed and protected inside the steel filter chamber; the filter is made of polyester, tailored with pockets in order to increase the filter surface (30.000 cm2), and has a high filtration efficiency (3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter.
Collection unit
The vacuumed material is placed inside a drop-down bin mounted on wheels (100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag. The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.
advanced unit

TS 3000


Industrial heavy duty vacuum cleaner
Suction unit
The suction is provided by a suction unit of the side channel blower type, with direct coupling between the fan and the motor shaft and no transmission system. It is thus completely maintenance free, fit for round- the-clock 24 hour duty, very silent and provides outstanding suction performances. A safety thermic switch cuts off the motor in case of overheating. The control board is placed inside a sturdy metal casing, in a safe position at the back, and includes two independent ON and OFF switches (Protection IP65), a safety emergency stop button and a star-triangle soft start device. A vacuum indicator enables constant checking of the suction performance, and to detect possible clogging of the filter. Two pressure relief valves protect the motor from overheating in case of clogging of the filter or other blockings in the suction system. A diffuser filter reduces the speed and noise of the air on the exhaust outlet.

Filter unit
The filter is placed and protected inside the steel filter chamber; the polyester star filter provides a filter surface of 120.000 cm2, and a high filtration efficiency (Class L 3 micron). An automatic filter shaking system, operated by an installed compressor, enables to clean the filter efficiently and constantly, by a vertical shaking movement (the frequency and length of which can be adjusted by means of a timer), so as to detach most of the dust and keep the filter clean, in order to increase its life and improve the suction performance of the machine. The tangential aluminium die-cast suction inlet (Ø120 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid and liquid material (the latter only within the capacity of the container), with no need to change or take out the filter. A cyclone welded inside the filter chamber contains most of the dust directly in the container, and protects the filter from cutting or tearing.

Collection unit
The vacuumed material is placed inside a drop-down bin mounted on wheels (220 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes; all metal parts of the vacuum are epoxy painted.
TS 3000
To choose from a wide range of HEPA vacuum cleaners, call Depureco in the West Midlands.

Call 01952 588 881
Share by: