Coolant Vacuums

recycling vacuums

Coolant recycling vacuums supplied UK wide from the West Midlands


Extend your machines' working life with equipment from Depureco.
Contact us

Quality coolant vacuums to enhance your industrial efficiency


Designed to remove and filter the coolant, swarf and oil from your industrial machinery, our specialist coolant vacuums can help to extend the working life of your machines and help them to work more efficiently.
M450 OIL

Mobile, compact and powerful, the M450 OIL vacuum is the ideal machine to suck up liquid (oil or coolant) mixed with metal chips, separate the oil from the chips and recover or dispose of the liquid.
 
The suction is provided by three by-pass stage motors, placed inside a sturdy steel casing, and operated by independent switches. A vacuum indicator is installed in order to detect possible clogging or anomalies in the suction; the motor head is protected from liquid and solid material through a nylon filter. The suction unit is protected by a steel cyclone and by polyester filter and a floating device, automatically stopping the suction when the liquid fills up the container.
 
A metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts), while the clean oil goes into the lower container (capacity 100 litres). It is then possible to discharge it, by means of a manual discharge valve. A level indicator enables the operator to constantly check the level of the liquid in the container.
 
The steel container is detachable (by means of a lever place at the back of the unit) thus making disposal operations of the solid part (chips and shavings) quick and easy.
 
The suction inlet (approx. 50 mm.) is tangential, thus providing a cyclone effect reducing the abrasive and clogging effect of the ingoing vacuumed material; a polyester filter enables the machine to be used effectively also for the suction of dry dust.
 
The vacuum cleaner is mounted on a solid steel trolley, equipped with braking and turning wheels
coolant vacuum

M 250 T3


Mobile, compact and powerful, the vacuum cleaner TECNOIL is the ideal machine to suck up liquid (oil or coolant) mixed with metal chips, separate the oil from the chips and recover the clean oil thanks to a powerful airflow reversal system.
 
The suction unit is a turbine motor of the “side channel blower" type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of 2.850 RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance, very silent and resistant, matching an IP 55 level. The suction unit is protected by a nylon filter and a floating device, which automatically stops the suction when the liquid fills up the container.
 
The suction inlet is tangential, with an internally welded cyclone that deflects the incoming material; a metal sieve grid (40 litres capacity) withholds the solid material (chips and metal parts), while the clean oil goes into the lower container (capacity 100 litres). It is then possible to pump it out rapidly, simply turning a handle that reverses the air flux, and pumps out rapidly the liquid through a discharge oil proof hose fitted with a gun and valve.
 
The container is detachable (simply by operating a lever at the back), compact and easy to move; it contains the sieve grid which retains the solid part (metal chips and shavings). The vacuum cleaner is mounted on a solid steel trolley, with a tool basket also providing a support for tools and hoses when not used, and equipped with braking castors.
 
Applications
Suction from machine tools of liquids, (mainly oils and coolants mixed with metal chips or other solid material)
Filtration and recovery of cutting oil and coolant liquid
Rapid collection or disposal of the filtered liquid
Reduced stand-by time of machine tools
Saving by recovering and using several times the same oil and coolant
M250 T3

M450 T3


The suction unit is a turbine motor of the “side channel blower” type: the fan being directly shafted on the motor shaft, this type of motor requires no transmission system and provides a performance of 2.850 RPM. It is thus completely maintenance free, ideal for non-stop and heavy duty performance (providing extra vacuum, up to 5000 mm. H20 depression), very silent and resistant, matching an IP 55 level. The suction unit is protected by a nylon filter and a floating device, automatically stopping the suction when the liquid fills up the container
 
The solid material (chips, metal parts and fine remains) are collected into a collection hopper placed on top of the collection tank, and withheld into a metal sieve grid (60 litres capacity); a user-friendly mechanism enables you to tilt the hopper and discharge easily the collected solid material, while the cleaned liquid flows into the lower collection tank (450 litres capacity). The collection tank is made of polyester coated steel, and has one slanted side in order to secure complete disposal of the liquid inside; two baskets provide a support for tools and hoses when not used, and a bolted panel enables easy cleaning of the collection tank.
 
A powerful electric pump (300 litres per minute), with a 2 mt. discharge oil proof hose fitted with a gun and valve, enables to pump out very rapidly the collected liquid. The vacuum cleaner is mounted on a solid steel trolley with two baskets to lay the accessories, equipped with braking and turning wheels.
 
Applications
  • Suction from machine tools of oils and coolants mixed with metal chips or other solid material
  • Filtration and recovery of cutting oil and coolant liquid
  • Rapid collection or disposal of the filtered liquid
  • Reduced stand-by time of machine tools
  • Saving by recovering and using several times the same oil and coolant
  • Possibility to suck up and pump out simultaneously
  • Need for just one operator to use the machine
M450 T3
Are you looking for coolant recycling vacuums? Call Depureco of the West Midlands.

01952 588 881
Share by: