Compressed Air Vacuums

vacuum units

Heavy duty vacuum suppliers in the West Midlands


Our heavy duty vacuum cleaners can pick up a wide variety of wet and dry waste materials such as dirt, dust, sawdust, swarf, oil and water. The Mastervac & Depureco compressed air vacuums are available with ATEX Certification - Zones 1-2 as well as Zones 21-22. Contact us for more information.
Talk to us

M 235 AIR


The vacuum cleaner Mistral 352 DS AIR is a compressed air vacuum cleaner powered by two powerful Venturi suction units, (using no electric or mechanical components), placed inside a sturdy steel casing, and thus protected against any external damage; special noise buffers reduce the noise within the safety standards of work and the exhausted air is conveyed towards the ground, so as not to bother the user and not to raise possible dust in the neighbouring area. The control board includes an air pressure gauge (to check the pressure of the incoming air supply) and vacuum indicator, useful to detect possible clogging of the filter. Two handles enable an easy lifting and removal of the suction head, for possible inspection or replacement of the underlying filter.

Filter unit
The filter is placed and protected inside the steel filter chamber. The polyester star filter provides a filter surface of 20.000 cm2, and high filtration efficiency (Class L, 3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust and solid, reducing the clogging effect and with no need to change or take out the filter.

Collection unit
The vacuumed material is placed inside a drop-down bin mounted on wheels (35 litres capacity), operated by user friendly handles placed at operator's height, which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag (special bags for collection of hazardous dust are available on request) The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes. A compressor (not included) is needed to operate the vacuum. 
M 235 AIR

M 280 AIR


Air operated dry industrial vacuum
Suction unit
The suction cleaner is provided by two powerful Venturi suction units, (using no electric or mechanical components), placed inside a sturdy steel casing. The control board includes an air pressure gauge (to check the pressure of the incoming air supply) and vacuum indicator, useful to detect possible clogging of the filter. Two handles placed on the sides enable an easy lifting and removal of the suction head, for possible inspection or replacement of the underlying filter.
Filter & Collection unit
The dustkit is made by a bag type filter, made up by a polyester filter on the inside, providing a class L filtration (3 micron efficiency). The dust filter has a self cleaning system, which causes the dust to shake off each time the vacuum is shut off.
The wet kit is made up by a floating device, protecting the motor against damage from liquids, foam and solid objects; a nylon filter prevents solid material blocking the floating, or foam getting to the motors. An 80 litre steel container enables to dispose easily of the sucked up liquid, which can be discharged by a flexible discharge hose.
 
The frame is completely made of steel, mounted on sturdy castors with brake.
M 280 AIR

M450 S AIR HD


Air operated dry industrial vacuum
Suction unit
The vacuum cleaner M450 S AIR HD is a compressed air vacuum cleaner powered by two powerful Venturi suction units, (using no electric or mechanical components), placed inside a sturdy steel casing, and thus protected against any external damage; special noise buffers reduce the noise within the safety standards of work and the exhausted air is conveyed towards the ground, so as not to bother the user and not to raise possible dust in the neighbouring area. The control board includes an air pressure gauge (to check the pressure of the incoming air supply) and vacuum indicator, useful to detect possible clogging of the filter. Two handles placed on the sides enable an easy lifting and removal of the suction head, for possible inspection or replacement of the underlying filter.
Filter unit
The filter is placed and protected inside the steel filter chamber. The polyester star filter provides a filter surface of 30.000 cm2, and high filtration efficiency (Class L, 3 micron). A manual filter shaker enables the user to clean the filter efficiently, by a vertical shaking movement, so as to detach most of the dust and maintain the filter clean, in order to increase its life and maintain the suction performance of the machine. The frontal aluminium die-cast suction inlet (Ø80 mm. diameter), placed below the filter, makes it possible to vacuum at the same time dust, solid & liquid material (the latter only within the capacity of the container, unless the machine is provided with floating systems), with no need to change or take out the filter.
Collection unit
The vacuumed material is placed inside a drop-down bin mounted on wheels (100 litres capacity), which makes it possible to dispose easily and safely of the sucked material, if need be collecting it directly into a plastic bag.
The vacuum is mounted on a sturdy steel chassis with two pivoting wheels, one of which with brakes. A compressor (not included) is needed to operate the vacuum.
M450 S AIR HD
Are you looking for heavy duty vacuum cleaners in the West Midlands? Call Depureco.

Call 01952 588 881
Share by: